−
CONTINUED
Unclip the USB connector by
pivoting it, and pull out the USB
adapter cable in the console
compartment.
Connect the USB flash memory
device to the USB adapter cable
correctly and securely.
When the USB flash memory device
is connected and the USB mode is
selected on the audio system, the
USB indicator is shown in the upper
display. It also shows the folder and
file numbers. Pressing the AUDIO
button displays the folder and file
names,andtheelapsedtimeinthe
navigation screen.
To move rapidly within a track, press
andholdthe / or /
button.
Each time you press and
release the side of the SKIP bar,
the system skips forward to the
beginning of the next file. Press and
release the side of the bar, to
skip backward to the beginning of
the current file. Press it again to skip
to the beginning of the previous file.
Use the SKIP bar while a USB flash
memory device is playing to select
passages and change files.
1. 2.
Audio System
Connecting a USB Flash Memory
Device
To Change or Select Files
SKIP
Features
259
USB CONNECTOR
USB ADAPTER CABLE
USB ADAPTER CABLE
０９／０４／０２ １９：１１：１１ ３１ＳＪＡ６５０ ０２６４
To Next Page
Loading...
Need help?
General
