−
−
This particular message is displayed
when you drive over 10 miles (for
U.S. models) or 10 km (for Canadian
models) after seeing 0%.
When you press the SEL/RESET
button to select the engine oil life
minder, the message ‘‘SERVICE’’,
along with the maintenance item
code and the total negative mileage
aftertheoillifebecame0percent,
will be displayed on the lower part of
the multi-information display.
The maximum total negative mileage
is ‘‘ 9999 mile’’ (for U.S. models) or
‘‘ 9999 km’’ (for Canadian models).
If you have the required service
performed but do not reset the
display, or reset the display without
performing the service, the system
will not show the proper
maintenance intervals. This can lead
to serious mechanical problems
because you will no longer have an
accurate record of when
maintenance is needed.
CONTINUED
Maintenance Minder
Important Maintenance
Precautions
Maintenance
445
U.S.
CANADA
TOTAL PAST DUE MILEAGE
０９／０４／０２ １９：３５：５６ ３１ＳＪＡ６５０ ０４５０
To Next Page
Loading...
