Before mounting the spare tire,
wipeanydirtoffthemounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully;itmaybehotfrom
driving.
Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten the
wheel nuts fully.
Lower the vehicle to the ground,
and remove the jack.
10. 11. 12.
CONTINUED
Changing a Flat Tire
Taking Care of the Unexpected
491
BRAKE HUB
０９／０４／０２ １９：４１：５４ ３１ＳＪＡ６５０ ０４９６
To Next Page
Loading...
Need help?
General
