CONTINUED
To close the windows and the
moonroof further, turn and hold
the key again (within 10 seconds
of step 2).
If the windows and the
moonroof stop before the desired
position, repeat steps 2 and 3.
To open the moonroof fully, pull
back the moonroof switch firmly.
The moonroof opens all the way. To
stop the moonroof from opening
fully, push the switch briefly.
Turn the ignition switch to the ON
(II) position before operating the
moonroof switch on the ceiling
console. To open the moonroof, pull
back the moonroof switch. To close
the moonroof, push the moonroof
switch forward. Release the switch
to stop the moonroof.
To tilt the moonroof, push the center
of the moonroof switch straight up.
To stop the moonroof from tilting
fully open, push the moonroof switch
forward.
4. Opening/Closing the Moonroof
with the Ceiling Console Switch
Power Windows, Moonroof
Instruments and Controls
189
NOTE:
MOONROOF SWITCH
Open
Close
Tilt
Opening or closing the
moonroof on someone’s hands
or fingers can cause serious
injury.
Make sure all hands and fingers
are clear of the moonroof
before opening or closing it.
10/08/04 19:14:17 31SJA660_194
To Next Page
Loading...
