＊
＊
If something electrical in your
vehicle stops working, the first thing
youshouldcheckforisablownfuse.
Determine from the chart on pages
, and , or the diagram on
thefuseboxlidorthefuselabel,
which fuse or fuses control that
component. Check those fuses first,
but check all the fuses before
deciding that a blown fuse is not the
cause. Replace any blown fuses and
check if the device works.
Remove the cover from the
Check each of the large fuses in
the under-hood fuse box by
looking at the wire inside.
Removing these fuses requires a
Phillips-head screwdriver.
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. VEHICLE
OFF (LOCK) Mode is the
equivalent of LOCK (0). For
more information, see pages
and .
Turn the ignition switch to the
LOCK (0) position.
Make sure the headlights and all
other accessories are off.
3.
1.
2.
:
181178
569 570 571
Checking and Replacing Fuses
Fuses
566
FUSE
BLOWN
10/07/29 12:54:38 31TK4620_571
fuse box.
To Next Page
Loading...
