C O L L I S I O N M I T I G A T I O N B R A K I N G S Y S T E M
T M
( C M B S
T M
)
Can alert you to the possibility of a front-end collision and help reduce the severity of
the collision if you are unable to avoid it. Alerts depend on the distance setting. See
Forward Collision Warning on the left for instructions on changing the distance
setting. Available with Advance Package.
T u r n i n g C M B S O f f o r O n
CMBS Off
A beep sounds and a message
appears in the MID.
CMBS On
A beep sounds, a message
appears in the MID, and the CMBS
indicator turns on.
* Depending on the circumstances, CMBS may not go through all of the alert stages before initiating the last stage.
4 S t a g e s o f C M B S *
Press and hold CMBS OFF.
20
21
11
F O R W A R D C O L L I S I O N W A R N I N G ( F C W )
Alerts you to the possibility of a front-end collision. Available with Standard and
Technology Packages.
If the camera mounted between the windshield and the rearview mirror detects
a vehicle in front of you when your vehicle speed is 10 mph or higher—and it
determines there is a likelihood of a frontal collision—the system provides you
with visual and audible warnings.
H o w I t W o r k s
C h a n g i n g S e t t i n g s
1. Press SETTINGS. Use the
interface dial to make and
enter selections.
2. Select Vehicle Settings.
3. Select Forward Collision
Warning Distance.
4. Select Long, Normal, Short,
or Off.
5. Press BACK to exit the menu.
Determine the warning timing, or turn the system off.*
If you do not brake in time
or take preventive action:
• BRAKE flashes in the MID
• a beep sounds
continuously
FCW may not activate under certain conditions. See your Owner’s Manual
for more information.
Visual
warning
Audible
warning
Seat belt
retraction
Brake
application
Stage 1
Stage 2
Stage 3
Stage 4
Heads-up
warning timing
depends on the
CMBS distance
setting.
Short
Normal
Long
Lightly applied Lightly applied
Strongly applied Strongly applied
*You can also change these settings using the
multi-information display (see page 6).
To Next Page
Loading...
