Position Setup
Here are the two custom settings for
the position setup:
●
MEMORY POSITION LINK
●
AUTO TILT & TELESCOPE
STEERING WHEEL
While ‘‘POSITION SETUP’’ is
shown, press the SEL/RESET button
to enter the customize mode.
Each time you press the INFO
(▲/▼) button, the screen changes
as shown in the illustration. Press the
INFO (▲/▼) button until you see
the setting you want to customize,
then press the SEL/RESET button to
enter your selection.
SEL/RESET
BUTTON
NFO (▲or▼)
BUTTON
CONTINUED
Multi-Information Display
97
Instruments and Controls
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu