Acura MDX 2009 User Manual

5. Press and release the Talk button.
If you say ‘‘OK’’ after the beep, the
HFL response is ‘‘The phone has
been deleted. Returning to the
main menu.’’ If you say ‘‘Go back,’’
or ‘‘Cancel,’’ the phone will not be
deleted.
To list all paired phones, do this:
1. Press and release the Talk button.
After the beep, say ‘‘Phone setup.’’
The HFL response is ‘‘Phone setup
options are status, pair, edit,
delete, and list.’’
2. Press and release the Talk button.
After the beep, say ‘‘List.’’ The
HFL responds by listing the name
of each paired phone. When all
phones paired to the system have
been read, the HFL response is
‘‘The entire list has been read.
Returning to the main menu.’’
To find out the status of the phone being
used, do this:
1. Press and release the Talk button.
After the beep, say ‘‘Phone setup.’’
The HFL response is, ‘‘Phone
setup options are status, pair, edit,
delete, and list.’’
2. Press and release the Talk button.
After the beep, say ‘‘Status.’’ An
example of the HFL response is,
‘‘Eric's phone is linked. Battery
strength is three bars. Signal
strength is five bars, and the
phone is roaming. Returning to the
main menu.’’
To change from the curr ently linked
phone to another paired phone, do this:
1. Press and release the Talk button.
After the beep, say ‘‘Next phone.’’
The HFL response is ‘‘Searching
for the next phone.’’ The HFL then
disconnects the linked phone and
searches for another paired phone.
If no other phones are found, the
first phone remains linked.
Bluetooth
®
HandsFreeLink
®
288
08/06/06 16:58:07 09 ACURA MDX MMC North America Owner's M 50 31STX620 enu
2009 MDX
Table Of Contents
Main Menu

Acura MDX 2009 Specifications

General

Brand	Acura
Model	MDX 2009
Category	Automobile
Language	English