Indicator Name On/Blinking Explanation Message
Collision
Mitigation Braking
System
TM
(CMBS
TM
)
Indicator
*
●
Comes on when the CMBS
TM
system shuts itself off.
●
Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your vehicle in
a safe place, and wipe it off with a soft cloth.
2 Front Sensor Camera
*
P. 363
●
When the radar sensor gets dirty, stop your
vehicle in a safe place, and wipe off dirt using
a soft cloth.
●
Have your vehicle checked by a dealer if the
message does not disappear even after you
clean the sensor cover.
2 Collision Mitigation Braking System
TM
(CMBS
TM
)
*
P. 416
●
Stays on - The temperature inside the camera
is too high. Use the climate control system to
cool down the camera. The system activates
when the temperature inside the camera cools
down.
2 Front Sensor Camera
*
P. 363
To Next Page
Loading...
Need help?
General
