uuAudio System Basic OperationuOn Demand Multi-Use Display
TM
238
1. Select More, then Sound.
2. Use (+, (- or other icons to adjust the
setting.
1. Select More, then Screen Settings.
2. Use
(+, (- or other icons to adjust the
setting.
■
Adjusting the Sound
1Adjusting the Sound
Select Off, Low, Mid or High for the SVC setting.
2 Adjusting the Sound P. 243
Instead of using
(+, (- or icons, you can also touch
the point where your desired setting is.
You can also adjust the sound by selecting on
the On Demand Multi-Use Display
TM
.
■
Changing the Screen Settings
1Changing the Screen Settings
The followings are adjustable screen settings:
• Sync Display Brightness
Selects whether the screen brightness synchronizes
with the instruments panel brightness.
• Brightness
• Contrast
• Black Level
• Display
Changes between the daytime or nighttime
modes.
• Beep
Mutes a beep that sounds every time you touch the
screen.
• Keyboard
Changes the on-screen keyboard from the
alphabetical order to the qwerty type.
• Vibration
Turns on and off the vibration when you touch the
screen.
• Fade Timer
Sets the screen black out timing.
Instead of using
(+, (- or icons, you can also touch
the point where your desired setting is.
17 ACURA MDX-31TZ56300.book 238 ページ ２０１６年１０月２５日 火曜日 午後２時２７分
To Next Page
Loading...
