104 | | 105
DRIVINGDRIVING
Automatic Brake Hold
Use brake hold to make stop-and-go driving easier.
It maintains rear brake hold even after the brake
pedal is released. Make sure the vehicle is on and
your seat belt is fastened when operating this
feature.
To turn the system on or off: Press the automatic
brake hold button.
To activate: Brake to a full stop. Once the brake-hold indicator lamp comes on,
release the brake pedal.
To release: Press the accelerator.
Brake hold
Activating the automatic brake hold system on steep hills or slippery roads
may still allow the vehicle to move if you remove your foot from the brake
pedal.
If a vehicle unexpectedly moves, it may cause a crash resulting in serious
injury or death.
Never activate the automatic brake hold system or rely on it to keep a
vehicle from moving when stopped on a steep hill or slippery roads.
WARNING
Using the automatic brake hold system to park the vehicle may result in the
vehicle unexpectedly moving.
If a vehicle moves unexpectedly, it may cause a crash, resulting in serious
injury or death.
Never leave the vehicle when braking is temporarily kept by automatic brake
hold and always park the vehicle by putting the transmission in (P) and
applying the parking brake.
WARNING
Adaptive Cruise Control (ACC) with Low Speed Follow
Helps maintain a constant vehicle speed and a set following interval behind a
vehicle detected ahead of yours.
To Next Page
Loading...
