To change the bulb on the driver’s
side, start the engine, turn the
steering wheel all the way to the
right, and turn off the engine. To
change the bulb on the passenger’s
side, turn the steering wheel to the
left.
Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
Pull the inner fender cover away
from the fender and bumper.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Remove the socket f rom the
headlight assembly by turning it
one-quarter turn counterclockwise.
4.
5.2.
1.
3.
Replacing a Front Parking Light
Bulb
Lights
218
HOLDING CLIPS
To Next Page
Loading...
