Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
Move t he seat belt buckle or
tongue away from the lower
anchors.
To install a LATCH-compatible child
seat:
Place the child seat on the vehicle
seat, then attach the seat to the
lower ancho rs according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connection as
shown above.
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for Children) at the outer
rear seats.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each lower anchor is
indicated by a small button above the
anchor point.
1.
2.
3.
Installing a Child Seat
Installing a Child Seat with
LATCH
Driver and Passenger Safety
39
Rigid type
LOWERANCHORMARKS
To Next Page
Loading...
Need help?
General
