If you fail to enter the desired
adjustment properly, you will see the
above display for several seconds,
then the display goes back to
‘‘CUSTOMIZE MENU.’’ Repeat the
adjustment.
To exit ‘‘ADJUST OUTSIDE TEMP.
DISPLAY,’’ press the INFO button
until you see ‘‘EXIT,’’ and press the
SEL/RESET button. The display
goes back to ‘‘CUSTOMIZE MENU.’’
When your selection is successfully
entered, you will see the above
display for several seconds, and then
the display goes back to
‘‘CUSTOMIZE MENU.’’
CONTINUED
Multi-Information Display
Instruments and Controls
97
U.S. model is shown
０６／０９／０８ ２０：２７：０８ ３１ＳＥＡ６３０ ０１０２
To Next Page
Loading...
Need help?
General
