When any of the tires have low
pressure, the low tire pressure
indicator on the instrument panel
comes on, and the multi-information
display also interrupts the current
display and shows a ‘‘CHECK TIRE
PRESSURE’’ message. You can see
one or more of the low pressure tire
positions highlighted in the display
along with this message.
When the TPMS is functioning
normally, you can see the tire
pressure readings of each tire in psi
(U.S. models) or kPa (Canadian
models) by pressing the SEL/
RESET button while the multi-
information display shows the tire
pressure monitor.
It is possible that the pressures
shown on the multi-information
display and the pressures you
manually measure are slightly
different.
If the difference is significant or you
cannot make the low tire pressure
indicator and message on the multi-
information display go out after
inflating the tires to the specified
values, have your dealer check the
system as soon as possible.
Tire Pressure Monitoring System (TPMS)
Tire Pressure Readings
Driving
259
SEL/RESET BUTTON
U.S.
Canada
０６／０９／０８ ２０：４７：５８ ３１ＳＥＡ６３０ ０２６４
To Next Page
Loading...
Need help?
General
