CONTINUED
Also, the percentage ‘‘0 %’’ keeps
blinking on the display.
To cancel the engine oil life display,
press the SEL/RESET button to
return to the previous display.
If the indicated required service is
not done and the remaining engine
oil life becomes 0 %, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
thetotalmileageaftertheremaining
oillifebecame0%,andthe
maintenance item code(s).
This particular message is displayed
when the mileage is less than 10
miles (for U.S. models) or 10 km (for
Canadian models) after the engine
oillifebecame0%.
After the message on the multi-
information display is canceled by
pressing the INFO button, the
engine oil life display will appear in
the lower segment. You will see a
‘‘SERVICE’’ message along with the
percentage ‘‘0%’’ and the
maintenance item code(s) displayed.
Maintenance Minder
Maintenance
279
CANADAU.S.
０６／０９／０８ ２０：５０：１５ ３１ＳＥＡ６３０ ０２８４
To Next Page
Loading...
Need help?
General
