Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint and over the seat-back,
making sure the strap is not
twisted.
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
Pushandpullthechildseat
forward and from side-to-side to
verify that it is secure.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
4.
5.
6.
7.
139
Installing a Child Seat
Driver and Passenger Safety
47
TETHER STRAP HOOK
Flexible type
ANCHOR
０６／０９／０８ ２０：２０：２１ ３１ＳＥＡ６３０ ００５２
To Next Page
Loading...
Need help?
General
