While the multi-information display
is showing ‘‘CHANGE SETTING,’’
press the SEL/RESET button. The
display will start showing the initial
‘‘CUSTOMIZE GROUP.’’ Each time
you press the INFO button, the
display changes as shown in the next
column. Press the INFO button until
you see the setup you want to
customize, and press the SEL/
RESET button to enter your
selection.
You can customize some of the
vehicle control settings to your
preference. Here are the settings
you can customize:
METER SETUP
POSITION SETUP
LIGHTING SETUP
DOOR/WINDOW SETUP
WIPER SETUP
Change Setting
Multi-Information Display
92
: Press SEL/RESET Button.
: Press the INFO Button.
０６／０９／０８ ２０：２６：３５ ３１ＳＥＡ６３０ ００９７
To Next Page
Loading...
Need help?
General
