5
Display Unit Placement
Place display unit in a dry area free of dirt and dust. Display is magnet-
mountable. For wall mounting, hang using the keyhole located on the back of
the unit.
Sensor Placement
Sensor #1 should be placed in the
REFRIGERATOR. Sensor #2 should be
placed in the FREEZER.
Note: Both sensors will work in either
location, however the default alerts
are based on the placement mentioned
above.
Each sensor is equipped with a
spring-action clip with a rubber grip
to securely attached to the edge of a
glass or wire shelf (A).
Each sensor also includes a detachable
suction cup that can be used to attach
the sensor to the interior surface of the
refrigerator (B). Please note: suction
cups do not adhere well to freezing
surfaces.
Display unit and sensors must be
located within 75 ft (23 m) of each
other.
To Next Page
Loading...