What to do if batteries are not charged above 13.5 V on AcuTemp Refrigerator?
If the batteries on your AcuTemp Refrigerator aren't charging above 13.5V, plug the unit into AC power to recharge them at the next available opportunity. If the batteries still don't charge, initiate a repair work order.
What to do if water accumulation in the bottom of the inside tub of AcuTemp Refrigerator?
If you find water accumulation in the bottom of the inside tub of your AcuTemp Refrigerator, remove the water. Check the bottom of the inside tub daily in high humidity or weekly in dry conditions for water accumulation.
What to do if intake filters of AcuTemp Refrigerator have dirt accumulation?
If the intake filters of your AcuTemp Refrigerator have dirt accumulation, clean them. Check the intake filters daily for dirt accumulation.
What to do if water accumulates inside lid area of AcuTemp Refrigerator?
If water accumulates inside the lid area of your AcuTemp Refrigerator, clean the area and remove any debris. Check the lid gaskets weekly or when water accumulates inside, ensuring they are clean and free of debris.
What to do if battery terminals are corroded on AcuTemp Refrigerator?
If you find that the battery terminals on your AcuTemp Refrigerator are corroded, initiate a repair work order. Also, make sure to check the battery terminals for corrosion regularly.
What to do if unit blower does not run constantly when operating on AC power in AcuTemp Refrigerator?
If the unit blower of your AcuTemp Refrigerator does not run constantly when operating on AC power, replace the fuses and check the line fuses.
What to do if there are missing, damaged, or corroded parts on AcuTemp Refrigerator?
If you notice missing, damaged, or corroded parts on your AcuTemp Refrigerator, initiate a repair work order. Perform a general check for missing, damaged, or corroded parts.
Detailed description of the HemaCool ® unit's features and capabilities.
Overview of the HemaCool ®'s ergonomic design and operational features.
Explains the normal operational flow and system behavior.
Details the LCD, LEDs, and control buttons for user interaction.
Explains the functions of the ON/OFF, DISPLAY, and MODE keys.
Details the information displayed on the LCD in various modes.
Explains battery charge level indication and charging process.
Describes the COOL and FREEZE temperature control modes.
Essential warnings and cautions for operating the HemaCool ® unit safely.
Step-by-step guide for connecting internal batteries and initial setup.
A table of common tasks, their pass/fail status, and fail actions.
General| Brand | AcuTemp |
|---|---|
| Model | HemaCool HMC-MIL-1 |
| Category | Refrigerator |
| Capacity | 45 blood bags |
| Door Lock | Yes |
| Alarm System | Yes |
| Voltage | 115 VAC |
| Power | 115 VAC |
To Next Page
