Adam Pumps DI-FLOW IN-LINE Diesel - Use and Starting; Tank Stock and Minimum Stock Alarm

DI - FLOW IN LINE• ADAM PUMPS 6
displays 5.1 digits, identifica shows all
litres transferred in a defined period of time. This
totalizer can be reset by pressing button.
displays 5 digits, no decimal,
shows the calculated available stock. To insert
available stock, it is necessary to go to “Stock”
screen and press button. Value on display will
start blinking and will be then modifiable, increa-
sing the value pressing button or decreasing
it pressing button until you reach the desired
number. Should you maintain the button pressed,
the value will change rapidly. To confirm, wait 10
seconds until the “partial” screen I displayed.
displays 5 digits, no decimal
place, settable at maximum 65000 litres. Such
number identifies the minimum stock in the tank
under which the meter will display the alarm. To set
this alarm level, go to “Alert” screens and press
button . Value on display will start blinking and will
be then modifiable, increasing the value pressing
button or decreasing it pressing button until
you reach the desired number. Should you main-
tain the button pressed, the value will change rapi-
dly. To confirm, wait 10 seconds until the “partial”
screen I displayed.
NB. Setting the value “0”, alarm will be de-activa-
ted.
3.4.4 “TANK STOCK” SCREENS WITH
MESSAGE ”STOCK””
3.4.5 “MINIMUM STOCK ALARM” SCREEN
WITH MESSAGE ”ALERT”
3.4.6 “LAST TRANSACTIONS SCREENS”