ADAMS RITE 7400 User Manual

www.adamsrite.com
Phone: 800-872-3267
Fax: 800-232-7329
C
G
B
D
E
A
J
I
H
C
L
C
L
F
L
C
B
A
G
H
E
K
D
1.38
F
C
L
C
L
C
L
7411
WOOD
JAMBS
C
G
B
D
A
J
H
F
E
C
L
I
G
B
C
D
J
A
.375
C
L
E
H
C
L
F
C
B
A
G
E
D
H
C
L
G
B
C
A
D
E
74R2
METAL JAMB
C
L
INSIDE
FACE OF
CLOSED
DOOR
F
J
PRODUCT MUST BE INSTALLED
ACCORDING TO ALL APPLICABLE
BUILDING AND LIFE SAFETY CODES
WIRE
NUTS
MOUNTING
CLIP
PRESSURE
SENSITIVE
SPACER
74R1 & 74R2
SHIM KIT
91-0096 OR
91-0097
B
E
.375
C
G
J
D
A
1.38
H
C
L
C
L
F
4.
5. USING WIRE NUTS PROVIDED, CONNECT
WIRES COMING FROM THE STRIKE TO THE
WIRES COMING FROM THE LOW VOLTAGE
SIDE OF THE TRANSFORMER.
6. INSERT ELECTRIC STRIKE INTO JAMB AND
ATTACH TO THE CLIPS USING TWO #12
COMBINATION SCREWS.
7. SECURE 8-32 MOUNTING CLIP SCREWS
HOLDING MOUNTING TO JAMB.
INSTALLATION INSTRUCTIONS
(SEE FIG. 1)
1. PREPARE DOOR JAMB/STILE PER DRAWING.
2. INSTALL MOUNTING CLIPS TO JAMB/STILE
USING 8-32 X 3/8 SCREWS & PRESSED
METAL NUTS. LEAVE SCREWS SLIGHTLY
LOOSE TO PERMIT EASY ALIGNMENT OF
CASE ASSEMBLY & CLIPS.
3.
SPACERS ARE PROVIDED TO ASSURE
FLUSH FINAL ASSEMBLY OF FACE PLATE &
JAMB/STILE. ADD ONE OR MORE SPACERS
BETWEEN JAMB/STILE & MOUNTING CLIP
WHEN FACE PLATE EXTENDS BEYOND THE
JAMB/STILE. WHEN THE FACE PLATE SETS
INSIDE THE JAMB/STILE, SPACERS MUST BE
ADDED BETWEEN THE MOUNTING CLIP & THE
ELECTRIC STRIKE FACE PLATE. SEE FIG. 1
TO ATTACH SPACER TO MOUNTING CLIP.
REMOVE PROTECTIVE COATING FROM
SPACER & PRESS TO DESIRED MOUNTING
CLIP SURFACE. MAKE SURE CLEARANCE
HOLE IN SPACER ALIGNS WITH HOLE IN
MOUNTING CLIP.
ATTACH SUBCOVER AND FACE PLATE TO THE
CASE ASSEMBLY USING TWO 8-32 X 1/4 SCREWS.
7430
ALUMINUM
DOOR JAMBS
7431
ALUMINUM
STILE
7440
METAL JAMB
74R1
STRIKE
7401
ALUMINUM
STILE
FIG. 1
7400
ALUMINUM
DOOR JAMBS
7440
WOOD DOOR
*
*
REQUIRES WDC7400
7410
ALUMINUM
JAMBS
7410
WOOD
JAMBS
Page of 1 2
A. UYEDA
R. RACHO
INSTALLATION INSTRUCTIONS
Date:
CR: 00170
Appvd: JB
Date: 04-26-18
Rev.
13
7400 ELECTRIC STRIKE
80-0180-309
04-26-18

ADAMS RITE 7400 Specifications

General

Brand	ADAMS RITE
Model	7400
Category	Door locks
Language	English

Summary

Installation Instructions

Prepare Door Jamb/Stile

Prepare the door jamb or stile according to the provided drawing specifications for installation.

Mounting Clip Installation

Attach mounting clips to the jamb/stile using specified screws and nuts, ensuring slight looseness for alignment.

Spacer Usage for Flush Assembly

Utilize spacers between the jamb/stile and mounting clip to achieve a flush final assembly of the face plate.

Wiring and Monitoring

Wiring Connections

Connect strike wires to the low voltage transformer wires using provided wire nuts. Solenoid wires are not polarized.

Optional Monitoring Switches

Monitored strikes feature internally mounted switches for latch bolt penetration and solenoid status.

Field Reversible Configuration

Fail-Secure to Fail-Safe Conversion

Instructions for converting the electric strike from fail-secure to fail-safe operation by shifting plates.

Fail-Safe to Fail-Secure Conversion

Instructions for converting the electric strike from fail-safe to fail-secure operation by shifting plates.