Need help?Do you have a question about the ADAPT SOLUTIONS LINK LK-SILC14L and is the answer not in the manual?
General warnings, wiring, tablet software, and reduced power mode information.
Instructions for removing the driver's seat and disconnecting its wiring.
Guide to removing plastic trims and seat belt parts from the seat.
Steps to unbolt the seat back and remove the seat cushion.
Instructions for removing the seat pan support and fan assembly.
Guidance on removing the main wiring harness and seat trim support.
Detailed steps for running power cables from the vehicle battery to the LINK.
Instructions for extending the vehicle's wire harness using provided components.
Securing the LINK unit onto the vehicle's floor adapters using specified bolts.
Connecting 12V power, installing seat trim support, and reconnecting seatbelt parts.
Modifying the seat cushion and reinstalling the seat back assembly.
Instructions for modifying vehicle trims to accommodate the LINK installation.
Routing seat switch harnesses and managing wiring for proper function.
Installing modified seat trims and reinstalling the seat belt.
Checking harness movement and performing the critical system reset procedure.
Using shims to create necessary clearance for the LINK during seat movement.
Interpreting audible signals for system status, battery, and reset.
Details on the 9V battery's role in maintaining LINK programming and its backup duration.
Guide to understanding LED indicators during normal and diagnostic modes.
Information on the 3-year limited warranty and procedures for obtaining service.
General| Output Voltage | 5V DC |
|---|---|
| Number of Ports | 2 |
| Product Type | Car Charger |
| Input Voltage | 12-24V DC |
| Compatibility | Universal (USB devices) |
| Material | Plastic |
| Cable Length | Not Applicable (Charger Only) |
To Next Page