The document describes the "SPEEDY-LIFT" by Adapt Solutions, a device designed to assist with the loading and unloading of wheelchairs into and out of a vehicle. Adapt Solutions emphasizes its commitment to innovative, quality mobility solutions that are reliable, sleek, and simple to use, ensuring they work when needed. The products are engineered for safety and durability, backed by third-party verification for compliance with Federal Motor Vehicle Safety Standards and Canadian Motor Vehicle Safety Standards.
Function Description:
The SPEEDY-LIFT is a mobility solution that automates the process of stowing and retrieving a wheelchair from a vehicle. It is designed for ease and speed of use.
Usage Features:
To get into your vehicle:
- Preparation: After transferring out of your wheelchair, open the sliding door of your vehicle and retrieve the hand-held pendant.
- Lowering the Lift: Press and hold the "OUT" button on the pendant until the SPEEDY-LIFT reaches its lowest point outside the vehicle. Then release the button.
- Loading the Wheelchair: Roll your wheelchair up to the SPEEDY-LIFT.
- Lifting the Wheelchair: Press and hold the "IN" button on the pendant, and the SPEEDY-LIFT will lift and stow the wheelchair into the vehicle.
- Completion: Once the wheelchair is in the vehicle, release the "IN" button, replace the hand-held pendant, and close the door.
To get out of your vehicle:
- Preparation: Open the sliding door of your vehicle and retrieve the hand-held pendant.
- Unloading the Wheelchair: Press and hold the "OUT" button on the pendant, and the SPEEDY-LIFT will lower the wheelchair outside the vehicle.
- Retrieving the Wheelchair: Once your wheelchair is outside the vehicle, roll it away from the SPEEDY-LIFT.
- Stowing the Lift: Press and hold the "IN" button until the SPEEDY-LIFT is fully stowed. Then release the button.
- Completion: Place the hand-held pendant inside the vehicle and close the door.
Important Technical Specifications:
- Weight Limit: Do not use a wheelchair exceeding 95 lbs.
- Bracket Design: The device includes a bracket designed for manual foldable wheelchairs. To fold the wheelchair, "pins" must be removed from the ends of the upper and lower cylindrical tubes, allowing the tubes to slide out from the bracket.
Maintenance Features:
Manual Backup System:
The SPEEDY-LIFT is equipped with a manual backup system to allow the lift to be stowed manually in case of a malfunction. If this system is needed, the user should contact their dealer for full diagnostic and necessary repairs.
- Locate Release Handle: Find the release handle on the side of the SPEEDY-LIFT.
- Caution: The SPEEDY-LIFT's up/down function is spring-loaded. Before lowering the release handle, place your hand on the top of the unit.
- Stowing Manually: Press and hold down the release handle and push the SPEEDY-LIFT back into the vehicle.
- Duration: Adapt Solutions #1 Ltd. provides a 3-year limited warranty to the original purchaser, covering defects in material and workmanship from the date of purchase.
- Coverage (First Year): During the first year, Adapt Solutions will supply replacement parts and a pre-set monetary amount (determined by Adapt Solutions) for repairs if a defect is discovered.
- Coverage (After First Year): After the initial year, only parts and components are covered. Labor and other services are not covered after the first year. Freight and other related repair charges become the responsibility of the original purchaser.
- Remedy: The sole remedy for a defect is repair or replacement of the defective part or component, at Adapt Solutions' discretion. If repair or replacement is not commercially practical or timely, Adapt Solutions may refund the purchase price.
- Exclusions: The warranty does not cover indirect, incidental, or consequential damages. It also excludes product damage due to installation error, product misuse, product abuse, accidents, physical damage, damage in shipment, modifications not made by Adapt Solutions, or repairs by unauthorized distributors.
- Implied Warranties: All implied warranties (including merchantability or fitness for a particular purpose) are limited to the duration of the stated warranty for the affected component.
- Installation Requirement: The product must be installed by an authorized dealer and operated properly to be warranted.
- Registration: Warranty registration must be completed and returned within 30 days of purchase.
Obtaining Warranty Parts or Reimbursement:
- Authorization: Obtain warranty authorization by calling your local Adapt Solutions dealer or Adapt Solutions directly at 1-866-641-0419.
- Return: Return the faulty component/equipment, freight prepaid, to the address provided by your dealer or Adapt Solutions, with proof of purchase indicating the date purchased.
- Adapt Solutions will pay for return shipping within the continental United States and Canada if a defect is discovered. If the problem is not covered by warranty, return freight and repair charges are the purchaser's responsibility.
- The warranty grants specific legal rights, which may vary by state/province. Adapt Solutions does not authorize anyone to extend the warranty's time or scope.
Adapt Solutions/Warranty Department
145 Damase-Breton
St-Lambert-de-Lauzon, Québec
G0S 2W0 Canada
Phone: 1-866-641-0419
Fax: 418-889-9838
General Phone: 418-889-0419
Email: tech@adaptsolutions.com
Website: www.adaptsolutions.com
Need help?
General
To Next Page