2
LINK
FUNCTIONS
The LINK is a pivoting and lowering seat base that uses your vehicle’s original seat which affords comfort and freedom.
The user-friendly functions of the LINK make it a breeze to operate.
POWER
Use the POWER button on top of the pendant to activate it. A blue light will
indicate that the pendant is active and will allow you to use your LINK. This light
will flash during movements. If the pendant is not used for ten (10) seconds, the
light will go off and the pendant will no longer be active. Simply press the power
button on the top of the pendant again to activate.
IN
Use the button to move the LINK into the vehicle.
OUT
Use the button to move the LINK out of the vehicle.
Watch the short video by scanning here:
To Next Page
Loading...