7
MANUAL BACKUP
Your new LINK is equipped with a manual backup system. If you were to encounter a power failure or other functional
problem, this backup system will allow your seat to be returned to the inside of your vehicle.
IMPORTANT: This feature cannot be used with a passenger seated on the unit and will require physical effort.
Please look through the following pages for the steps to follow and details on how to use this feature. For further instruction
on how to use the manual backup, a short video can be found by scanning the QR code below.
Please contact your dealer for full diagnostics and needed repairs.
If your LINK will not run and the seat is outside of the vehicle. Follow the steps outlined in the next few pages to manually
return the seat into the vehicle. (Note: If your LINK has the LIFT UP feature, two additional steps must be done first, found
on page13.)
To Next Page
Loading...