14
■ Windows 98SE users—If you connected and powered on your
USB Enclosure before you installed the device drivers:
a On your desktop, right-click My Computer, select
Properties, then click the Device Manager tab.
b Expand the categories to find your USB device, which will
appear with a yellow exclamation mark beside it. Select the
enclosure, then click the Remove button at the bottom of the
window.
c Disconnect the USB Y-cable.
d Complete the driver installation, following the instructions
on page 8.
e Reconnect the USB Y-cable.
For technical assistance initiating and formatting your disk drive,
please contact Microsoft (Windows users) or Apple (Macintosh
users).
To Next Page
