1
INTRODUCTION
With the SCSI Card 2940UW Pro, you can connect up to 15
SCSI devices to any IBM-compatible computer with PCI
expansion slots.
This installation guide provides step-by-step instructions for
• Installing the SCSI Card 2940UW Pro
• Connecting internal SCSI devices
• Connecting external SCSI devices
• Installing the SCSI Card 2940UW Pro software
See the SCSI Card 2940UW Pro User’s Reference for additional
information on using the SCSI Card 2940UW Pro.
After you turn off your computer and unplug the power cord,
remove the cover from the computer.
If you need guidance, refer to your computer manual for
instructions on removing the cover.
Discharge any static electricity build-up before handling your
SCSI card by touching a grounded metal object (like the
exposed metal parts on the back of your computer).
INSTALLING THE SCSI CARD 2940UW PRO
STEP 1
STEP 2
Turn OFF power to the computer and disconnect the
power cord.
WARNING
2940UWPro-ig.qxd 12/21/98 9:55 AM Page 1
To Next Page
Need help?
General
