Adaptive Sound SOUND+SLEEP MINI User Manual (English)

Questions and Answers:

S
Sheryl MillerJul 27, 2025
What to do if Adaptive Sound Speakers have no operation when the power switch is pressed?
- B
  Brittany BrownJul 27, 2025
  If your Adaptive Sound Speakers aren't turning on, there are several things to check: * Ensure the power cable is securely connected to both the MINI unit and the power adapter. * Try a different wall outlet to rule out a faulty outlet. * Replace the batteries, making sure to install them correctly. You can also use the power cable instead of batteries. * Make sure that the batteries are installed.
W
wmasonAug 2, 2025
Why Adaptive Sound SOUND+SLEEP MINI unit is on, but there is no sound?
- B
  Brian GarciaAug 2, 2025
  If your Adaptive Sound Speakers are powered on but producing no sound, consider the following: * The volume might be set too low. Press and hold the Volume Up button to increase the volume. * If the system is in External Audio Mode, ensure an audio input signal is provided. Alternatively, disconnect the audio cable from the audio input jack to switch to Internal Audio Mode.
M
Melissa PetersonAug 8, 2025
What to do if Adaptive Sound SOUND+SLEEP MINI Speakers have other unexpected behavior?
- E
  englishmelindaAug 8, 2025
  If your Adaptive Sound Speakers are exhibiting unexpected behavior, try a factory reset. Here’s how: 1. Remove the batteries. 2. Plug the power adapter into an AC outlet and connect the power cable. 3. Press and hold the Select Sound Button. 4. Press the Power Button. 5. Release the Power Button. 6. Release the Select Sound Button.
J
Jennifer VillanuevaAug 13, 2025
What to do if Adaptive Sound SOUND+SLEEP MINI unit goes on briefly but then goes off?
- C
  Cynthia PhillipsAug 14, 2025
  If your Adaptive Sound Speakers turn on briefly and then shut off, the batteries may be too weak. Replace the batteries or use the power cable.