1
2
8
NEO2
USER GUIDE
HOME MODE (HO):
Start nighttime temperature cutback
At the time of evening you wish temperature cutback to
start, press the button for more than ve seconds.
h (hours) will ash three times in the display and then 7
will ash continuously. With the or key select the
number of hours you want the temperature cutback period
to last. When your selection is displayed, conrm it by
pressing the button briey.
°C will ash three times and then 17 (°C) will ash con-
tinuously. Using the or key, select the temperature
you wish for the cutback period. When your selection is
displayed, conrm it by pressing the button briey.
The lamp will now ash slowly to indicate that tem-
perature cutback is active. The temperature is reduced
for the number of hours you have chosen, and this will be
repeated for the same period every night.
Start daytime temperature cutback
At the time you wish temperature cutback to start, press
for more than ve seconds.
h (hours) will ash three times and then 5 will ash
continuously. Using the or key, select the number
of hours you want the temperature cutback period to last.
When your selection is displayed, conrm it by pressing
the button briey.
d will ash three times and then a random number. Us-
ing the or key, enter the correct day of the week
(Monday = 1, etc.). Conrm by pressing the button
briey.
°C will ash three times and then 17 (°C) will ash contin-
uously. With the or key select your preferred cut-
back temperature. Conrm by pressing button briey.
The lamp will now ash slowly to indicate that daytime
temperature cutback is active. The temperature is reduced
to your selected setting for the number of hours you have
chosen. This will be repeated for the same period every
weekday, leaving Saturday and Sunday unaffected.
OFFICE MODE (OF):
To enter ofce mode hold down and press for more
than ve seconds until OF ashes and 20 (°C) is displayed.
Starting the temperature cutback function
Three hours before you usually leave the ofce press and
hold down the button for ve seconds (e.g. at 14:00 – 2
PM).
h (hours) will ash three times in the display, then 12 will
ash. Select the number of hours you want temperature
cutback to last by pressing the or key. Conrm
by pressing briey. (NB! Cutback will start after three
hours.)
d (day) will ash three times, then a random number will
be displayed. Enter the correct day using the or
key (Monday = 1, etc.). Conrm by pressing briey.
cL (time of day) will ash three times, and 16 is displayed.
Use the or key to enter the closest whole hour of
the day. Conrm by pressing briey.
°C will ash three times and then 16 is displayed. With the
or key, select your preferred cutback temperature.
Conrm by pressing the button briey.
Comfort temperature will continue for three hours before
the cutback period starts automatically.
(E.g. Pressing at 14:00 – 2 PM – will make temperature
cutback start at 17:00 – 5 PM and the lamp will ash slowly.
During the three hours before cutback start the lamp is lit
steadily.)
Working overtime
When working overtime the cutback function may be
overridden. Press for more than ve seconds. The set
comfort temperature will be displayed. The lamp will
light steadily while the lamp continues to ash. This
temporary period of comfort temperature will last for ve
hours.
1 Heat on/o
2 Desired (set) temperature
Up and Down keys
Function button
Night temperature cutback (7 days)
Day temperature cutback (5 days)
GB/AU/NZ
NB! The main power switch i located on the heater’s
underside to the right. The display lamp indicates that
power is connected and the heater is switched on.
Basic functions
When the heater is switched on for
the rst time, the display will show
20 degrees and the heater will im-
mediately start working.
Automatic saving of the comfort
temperature setting
NB! Each time a new comfort
temperature is selected using the
and keys, this latest choice
will be automatically saved. After
lengthy power cuts the last selected
setting is resumed.
To Next Page
Loading...
Need help?
General