Better - Analog AV cable
Composite Non-HD Video/Audio
yellow=video
white=left audio
black (black plugs into red audio on tv) =right audio
Component HD Video/Audio
red, blue, green=video
white (white to white on TV) =left audio
black (black plugs into red audio on tv) =right audio
Connect the specialized cable end to the AV output of the STB and the other ends to your TV using
either composite in or component in on your TV. This will require that your TV to be set to a video input
of Video or COMP in order to view programming (consult your TV manual).
Best - HDMI Cable
Digital Video and audio HD delivery. Connect one end of the HDMI cable to the HDMI port on the STB
and the other to your TV. This will require that your TV to be set to a video input of HDMI in order to
view programming (consult your TV manual).
Note: Arrow to Arrow. Arrow on the cable connector that
must match up to the Arrow on the box. Make sure flat
spot lines up. Important: If not matched up correctly the
pins bend/break easily and the box it will not work.
To Previous Page
Loading...
Need help?
General
