Do you have a question about the ADC 10 and is the answer not in the manual?
Category | Media Converter |
---|---|
Model | ADC 10 |
Operating Temperature | 0°C to 50°C |
Power Supply | 5VDC |
Humidity | 5% to 90% non-condensing |
Interface | 10/100/1000Base-T |
Fiber Type | Multi-mode/Single-mode |
Overview of the OptEnet Media Converter Module with SFPs and its manual.
Details the changes and updates made to the document across its revisions.
Provides a record of modifications and updates made to the manual.
Lists company and product trademarks, establishing brand identity.
Lists other documentation relevant to the product for further reading.
Explains the meaning of safety icons and terms like Danger, Warning, and Caution.
Essential safety guidelines for handling the equipment, covering radiation and electrical hazards.
States compliance with FCC regulations for Class A digital devices.
Confirms adherence to UL/CSA safety standards for electronic equipment.
Verifies compliance with network equipment building standards (NEBS).
Introduces the OptEnet Media Converter Module with SFP, its function, and connectivity.
Describes the front panel of the media converter, including LEDs and connectors.
Instructions for safely unpacking and inspecting the media converter module for damage.
Details precautions to prevent damage to electronic modules from electrostatic discharge (ESD).
Explains the installation process and dip-switch configuration for the 1000 Mb/s module.
Details the installation procedure for the 10/100 Mb/s media converter module into the chassis.
Guides on connecting fiber optic cables and RJ45 Ethernet cables to the module.
Explains the pinout configurations for 10/100BaseT(X) and 1000BaseT RJ45 connectors.
Presents detailed electrical, mechanical, and environmental specifications for the module.
Lists key electrical and mechanical parameters like voltage, power, dimensions, and weight.
Outlines the operating, short-term, and storage environmental conditions the module can withstand.
Step-by-step guide to power up the module and verify its initial operation.
Details the expected LED behavior and auto-negotiation for 10/100 Mb/s modules during power-up.
Explains the LED status and auto-negotiation for 1000 Mb/s modules after power-up.
Information on how to control and operate the media converter module.
Guidelines for performing routine maintenance on the media converter module.
Provides a troubleshooting flowchart and corrective actions for common module issues.
Contact information and support resources for customers needing assistance.