ADC DSX-1 - Page 12

ADCP-80-325 • Issue 4 • January 2001
Page 12
 2001, ADC Telecommunications, Inc.
D
D
B
E
B
F
A
A
C
UPPER
JUMPER
WIREWAYS
CROSS-
CONNECT
VERTICAL
JUMPER
WIREWAYS
LOWER
JUMPER
WIREWAYS
CROSS-
AISLE
PANELS
DSX
MODULES
ROUTING RULES
A. ALL JUMPERS IN THE LEFT-HAND SIDE OF THE CROSS-CONNECT FIELD SHOULD
ENTER AND LEAVE THE BAY FROM THE LEFT VERTICAL WIREWAYS.
B. ALL JUMPERS IN THE RIGHT-HAND SIDE OF THE CROSS-CONNECT FIELD SHOULD
ENTER AND LEAVE THE BAY FROM THE RIGHT VERTICAL WIREWAYS.
C. ALL INTRABAY CROSS-CONNECTS SHOULD USE THE VERTICAL RINGS.
D. ALL INTERBAY CROSS-CONNECTS SHOULD USE THE HORIZONTAL WIREWAYS.
E. ALL JUMPERS ORIGINATING IN THE UPPER HALF OF THE CROSS-CONNECT FIELD
SHOULD ROUTE VIA THE UPPER HORIZONTAL WIREWAYS.
F. ALL JUMPERS ORIGINATING IN THE LOWER HALF OF THE CROSS-CONNECT FIELD
SHOULD ROUTE VIA THE LOWER HORIZONTAL WIREWAYS.
8389-A
Figure 8. Typical DSX Cross-Connect Routing