ADC Release 3.1 - Page 122

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-102
 2000, ADC Telecommunications, Inc.
DLP-712
Page 4 of 8
Cellworx Vision: Add EPS NE - Enter NE Identifier
X
Select the identifiers for the EPS and the RNE
to which it will be connected.
Ring node:
Expansion node:
Cancel Next >>
10890-E
1
1
Figure 712-3. Cellworx Vision Adding an STN-EPS ID Window
Cellworx Vision: Add EPS NE - Enter Slots/Ports
X
Enter the slot and port numbers of the
SEPI interface cards for both the EPS
and the RNE to which it will be connected.
Ring Node
Cancel Next >>
Slot:
Port:
Slot:
Port:
Expansion Node
12
1
12
1
10893-B
Figure 712-4. Cellworx Vision Add EPS NE - Enter Slots/Ports