ADC Release 3.1 - Page 214

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-194
 2000, ADC Telecommunications, Inc.
DLP-738
Page 3 of 7
Cellworx Vision Subnetwork Management System
File Configuration Fault Performance
Software
NMIC Platform
Topology
Time and Date
Connection
10966-E
Refresh...
Remove Expansion Shelf Network Element
Remove Ring Network Element
Add Expansion Shelf Network Element
Add Ring Network Element
Force Network Discovery ...
Turn Up Ring...
Revert to Saved Icon Layout...
Ring Audit
Ring Upgrade
Figure 738-1. Cellworx Vision Configuration Pull Down Menu
Cellworx Vision: Add Second Ring NE - Task Overview
1) Enter network element identifiers
7) Create test connection <optional>
8) Task complete
2) Connect left RICs.
4) Wait for new network element to boot.
5) Select software images.
6) Wait for discovery.
3) Connect right RICs.
11710-A
Figure 738-2. Cellworx Vision Add Second Ring Task Overview Window
Cellworx Vision: Add Ring NE- Enter Identifier
Please select the new network element's identifier.
Cancel Next>>
2
11712-A
Figure 738-3. Cellworx Vision Add Ring NE Enter ID Window