1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-196
2000, ADC Telecommunications, Inc.
DLP-738
Page 5 of 7
Cellworx Vision: Add EPS NE - Boot Time Exceeded
Normal boot time for the network element has
been exceeded. This could be the result of a
communication failure with the network element.
Please check all cables and the network element's
status via craft interface if necessary.
Retry
X
Quit
10888-A
Figure 738-7. Add NE Boot Time Exceeded Window
Cellworx Vision: Add EPS NE - Reconnect Cables
X
!
!
Cancelling at this time could leave the ring
in an abnormal state since the physical layout
has been modified. Please reconnect the
network elements back to the physical state
they were in prior to this procedure.
OK
10892-C
Figure 738-8. Add EPS NE - Reconnect Cables Instructional Window
To Next Page
Loading...
