ADC Release 3.1 - Page 442

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-422
© 2000, ADC Telecommunications, Inc.
DLP-794
Page 3 of 3
Cellworx Vision: PM Threshold Configuration AAL1 Layer
Card Type
X
T3 CES
Resource
SEs LCs BUs BOs SCIs DCs
8-1
3 751060360
Close
Apply
0026-005
Figure 794-3. Performance Monitoring T3 CES Port Configuration Window
Table 794-1. T3 CES Performance Monitoring Values
MONTYPE MAX 15-MINUTE
THRESHOLD
COMMENTS
SEs 900 Sets the number of AAL1 Sequence Errors the port can incur before the
system declares a TCA.
LCs 900 Sets the number of Lost Cells the port can incur before the system declares a
TCA.
BUs 900 Sets the number of Buffer Underflows the port can incur before the system
declares a TCA.
BOs 900 Sets the number of Buffer Overflows the port can incur before the system
declares a TCA.
SCIs 16383 Sets the number of Stuffing Cells Inserted the port can incur before the
system declares a TCA.
DCs 900 Sets the number of Discarded Cells the port can incur before the system
declares a TCA.