1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-428
© 2000, ADC Telecommunications, Inc.
DLP-795
Page 6 of 11
26. From the slot_2 NMIC shell, install the AIC/RIC and SCC software images by entering the
following commands:
/sbin/cwupgrade /tmp/p3.1/AicSccSwImages-3.1.0.2-2.ppc.rpm
27. From the slot_4 NMIC shell, install the AIC/RIC and SCC software images on the slot_4
NMIC by entering the following commands:
/sbin/cwupgrade /tmp/p3.1/AicSccSwImages-3.1.0.2-2.ppc.rpm
28. From the slot_2 NMIC shell, install the AIC/RIC and SCC bootrom flash images by
entering the following commands:
/sbin/cwupgrade /tmp/p3.1/AicSccBootroms-3.1.0.5-2.ppc.rpm
29. From the slot_4 NMIC shell, install the AIC/RIC and SCC software images by entering the
following commands:
/sbin/cwupgrade /tmp/p3.1/AicSccBootroms-3.1.0.5-2.ppc.rpm
30. From the slot_2 NMIC shell, enter the following command to install the Cellworx NMIC
software:
/sbin/cwupgrade /tmp/p3.1/cellworx-3.1.0.1-1.ppc.rpm
31. From the slot_4 NMIC shell, install the Cellworx NMIC software:
/sbin/cwupgrade /tmp/p3.1/cellworx-3.1.0.1-1.ppc.rpm
32. From the slot_2 NMIC shell, install the Feature Package software by entering either one of
the following commands depending on the feature package ordered:
/sbin/cwupgrade /tmp/p3.1/FeatureControl_aa-3.1.0.0-1.ppc.rpm
or
/sbin/cwupgrade /tmp/p3.1/FeatureControl_ab-3.1.0.1-1.ppc.rpm
33. From the slot_4 NMIC shell, install the Feature Package software by entering either one of
the following commands depending on the feature package ordered:
/sbin/cwupgrade /tmp/p3.1/FeatureControl_aa-3.1.0.0-1.ppc.rpm
or
/sbin/cwupgrade /tmp/p3.1/FeatureControl_ab-3.1.0.1-1.ppc.rpm
To Next Page
Loading...
