ADCP-70-220 • Issue 1 • November 2000 • Section 2 Operation and Maintenance
Page 2-26
© 2000, ADC Telecommunications, Inc.
NTP-011
Page 1 of 1
CONDUCT ACCEPTANCE TESTS ON A CELLWORX STN NODE
Summary: This procedure lists the test that can be performed on a newly installed Cellworx
STN node whether installed as a ring node or terminal node.
SONET Diagnostics DLP-766
Initiate a Protection Switch DLP-771
Perform Loopback Tests DLP-772
Initiate a Card Reset DLP-773
Execute an Alarm Cut Off (ACO) DLP-776
To Next Page
Loading...
