EasyManua.ls Logo

Add-com A10L - Setup; Safety Instructions

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setup
Safety Instructions
When using your amplifier, these basic precautions will reduce the risk of electric shock,
acoustic shock and personal injury.
• Read and understand all instructions in this manual
• Do not open the amplifier housing (excluding the battery compartment), as you
will void your warranty and expose yourself to potentially dangerous telephony
voltages.
• Disconnect the phone line, and refer to qualified service personnel if:
-Liquid has been spilled on the unit;
-The unit has been exposed to rain or water;
-The unit has been dropped or physically damaged;
-The unit shows a marked change in behaviour or performance
• Disconnect the phone line before cleaning.
• Clean the unit only with a damp cloth, and do NOT use liquid or aerosol cleaners.
• Avoid using the phone during electrical storms. There may be a risk of electrical or
acoustic shock.
• Use the unit only with headsets which are certified specifically for telephony
purposes. Uncertified headsets may not offer adequate protection against electric
and acoustic shock.