1.off
4.ct-0/1
2.chan
1.cap
3.del
2.send
5.ct-0/1
4.gap
1.bat
5.dp-0/1
2.temp
4.fact
3.leak
5.az-1
1.cal
3.clr
2.c-00
4.abs
inH₂O(20℃)
inH₂O(60℉)
mmH₂O(20℃)
mmH₂O(15℃)
ftH₂O(60℉)
Set factor for custom units( Refer to specification)
Wireless channel (CH-01~15)
Memory capacity status
Upload data
Delete all data, password is “218”
Logging Interval (0001s-9999s)
Keep the logging status after restart
( 1 means YES, 0 means NO)
Battery voltage
Environment temperature( support ℃、℉ )
Absolute pressure zeroing- Absolute
Auto zero
Cancel/recover calibration data
Cancel pressure zero
Pressure leak test
Restore factory settings, password is “218”
Device address (001~112)
Keep the wireless status after restart
( 1 means YES, 0 means NO)
6.off
Start/Stop logging
3.addr
Wireless on/off
Tare setting( Refer to specification) - Gauge
Extended units
Calibration
Utilities
Data logging
Wireless
ftH₂O(4℉)
Overpressure status: 1 means YES, 0 means NO.
5
View overpressure records ( Refer to specification)
Calibration(See calibration section on page 8)
To Next Page
Loading...
