Digital Pressure Gauge
18
Dimensions
Φ100 mm x 40 mm, : 157 (4" 1.6" 6.2")total height mm x x
Weight
500 g (1.1 )lbs
Fitting
1/4 NPT, / , 1/4B . ( )or custom-made1 2 PT SP, M20 1 5, autoclave ale r emaleNmof
Others
Auto off
Disabled m ser electable、15、30、45、60、90、120 inutes , .us
Filtering
Averaging (3 to 10 samples) or low-pass first-order filter.
Additional functions
Engineering units
Backlight urationd
Disable auto off 15 30 45 60 s , user selectable,,,, second
Max/Min data capture
Capture the Max and Min data during pressure measurement
Key lockout
To avoid mis-operations. When the gauge is in auto-storing status,
buttons will be locked automatically.
Overpressure larma
Display will flash over 120%FS
Battery voltage
easurementm
Extend units:
Pa k f HO HO, Pa, a, bar, mbar, psi, kg /cm , mm , mmHg, in , inHg, ozf/in , %, ℃, ℉
mP
2 2
₂₂
iHO HO HO HO HO HOn (20℃), in (60℉), mm (20℃), mm (15℃), ft (60℉), ft (4℃)₂₂ ₂ ₂₂₂
gauge will be power-off automatically.
To measure and display the battery voltage. When the battery voltage is too low,
This allows users to set a multiplier factor to be multiplied by the kPa measured pressure.
For example: 2 kPa bar factor a kPa pressure will display as 0.02.
=0.02 (2*0.01)， ：0.01， 2
( 680 / ) )
ADT can be set by the factory or via the Land Wireless software
To Next Page
Loading...