1.off
4ct01.-/
2.chan
1cap.
3 del.
2 send.
5ct01.-/
4 gap.
1.bat
5dp01.-/
2temp.
4fact.
3 leak.
51.-az
1cal.
3clr.
2c00.-
4 abs.
in 20(℃)HO₂
in 60(℉)HO₂
mm 20(℃)HO₂
mm 15(℃)HO₂
ft 60(℉)HO₂
Set factor for custom units Refer to specification()
Wireless channel CH 01 15( -~)
Memory capacity status
Upload data
Delete all data, password is “218”
Logging Interval s s(0001 -9999 )
Keep the logging status after restart
1 means YES, 0 means NO)(
Battery voltage
Environment temperature support(℃、℉)
Absolute pressure zeroing Absolute-
Auto zero
Cancel recover calibration data/
Cancel pressure zero
Pressure leak test
Restore factory settings, “password is 218”
Device address 001 112(~)
Keep the wireless status after restart
( 1 means YES, 0 means NO)
6off.
Start Stop logging/
3 addr.
Wireless on off/
Tare setting Refer to specification Gauge() -
Extended units
Calibration
Utilities
Data logging
Wireless
ft 4(℉)HO₂
Overpressure status: 1 means YES, 0 means NO.
Digital Pressure Gauge
5
View overpressure records ( )Refer to specification
Calibration See calibration section on page(8)
To Next Page
Loading...