Notes on changing the battery:
The battery must be changed when the
hands stop moving.
Only use the battery type specied in the
“Technical Data”.
Dispose of old batteries in an environmentally
friendly manner, see “Disposal”.
Receiving the time signal
After inserting the battery:
Beep sounds
Clock hands start to turn and show
"12o'clock" shortly thereafter.
Display shows temperature.
Alarm clock switches to time signal reception.
As soon as the time signal has been received
with sufficient strength, the hands begin to turn
again and then indicate the current time. This
process can last a few minutes.
Druckbuch Funkwecker CK 1713.indb 39 12.10.2017 16:48:57
To Next Page
Loading...
