Use
24
HM 1804 5-filter air purifier
Use
Operate the air purifier only if the air filter is inserted and fully
functional.
You will hear a beep every time a button is pressed.
Turning on the air purifier and selecting the power level
1. Press the button to switch on the device.
The ON/OFF LED and the power level II LED will go on.
I minimum power level
II medium power level
III maximum power level
2. Press the
button repeatedly to select a different power level (I, II or III). Note the
LED indicator.
Using the timer
The timer allows you to select a period of time. Once the selected period of time has
elapsed, the device will turn off automatically.
− Press the
button repeatedly to set the desired period of time (2, 4 or 8 hours)
while the device is on.
Note the LED indicator.
Pay attention to the following:
To disable the timer, press the
button repeatedly until the timer LED goes out.
To turn off the device before the set time has elapsed, press the
button.
Turning on the UVC lamp/ioniser
The UVC lamp and the ioniser eliminate microorganisms such as viruses, bacteria
and fungi, as well as unpleasant odours. When the ioniser is in operation, negatively
charged ions are released and the air appears fresher.
− Press the
button repeatedly to turn the UVC lamp or the ioniser on and o in
succession. Note the LED indicator.
Turning off the air purifier
− Press the button to switch o the device.
To Next Page
Loading...
Need help?
General