ADE KA 1803 - Before First Use; Checking and Assembly

Before first use
20
KA 1803 citrus juicer
Before first use
Checking the citrus juicer and scope of delivery
1. Carefully unpack the citrus juicer and remove all packaging material.
2. Check that the delivery is complete (see chapter “At a glance”).
3. Check whether the citrus juicer or its individual parts have any damage. If this is the
case, do not use the citrus juicer. In this case, contact the dealer where you bought
the device.
4. Before rst use, clean all parts of the citrus juicer as described in the chapter
“Cleaning”.
Assembling the citrus juicer
1. Place the motor block on the
glass carafe.
2. Insert the juice collector into the
motor block housing.
3. Place the pulp strainer on the
juice collector.
4. Put the small juicing cone on the
axle.
5. If necessary, place the big juicing
cone onto the small juicing cone
(see following section).
6. Plug the power cord into the
mains outlet.
The citrus juicer is ready for use.
All parts must be completely and
correctly inserted or fit onto one
another. Otherwise, the device
can not work.