6. Timer operation
Timer ON setting:
- When the air-conditioner is OFF, press the “Timer” button and
select a desired ON time through the temperature and time setting
buttons.
- “Preset ON Time” is displayed on the operation panel.
- ON time can be regulated at any time in 0-24 hours.
Timer OFF setting
- When the air-conditioner ON, press “Timer” button and select a
desired OFF time through the temperature and time setting
buttons.
- “Preset OFF Time” is displayed on the operation panel.
- OFF time can be regulated at any time in 0-24 hours.
7. SWING(air flow)
After machine turns on, press this key, the louver will swing continuously
left and right; by pressing this button again the movement will stop and
the louver remain in that position.
8. SLEEP CONTROL FUNCTION
- While in cooling mode, press the SLEEP key to set the temperature. It
increases 1ºC af+B7ter an hour and at most increases 2ºC after 2 hours.
- While in heating mode, press the SLEEP key to set the temperature. It
decreases 1 ºC after an hour and at most decreases 2ºC after 2 hours.
- Press the SLEEP key again can cancel the setting."
G
NOTE!
The compressor has been set so that it starts functioning three minutes
after the (re)start of the air conditioner. The cooling will switch off
when the room temperature is lower than the set temperature. Air
circulation will however continue to work on the set level. When the
room temperature rises above the set temperature, the cooling will
work again.
Appearance and Function of Remote Control
1
8
2
5
6
4 7
1. Temperature selector up
2. Fan speed selector
3. Sleep mode selector
4. Auto Swing selector
5. Mode selector
6. Hourly programming
7. On/Off switch
8. Temperature selector down
4
50
man_ACA114 ('21) V3.indd 50man_ACA114 ('21) V3.indd 50 16-12-2021 17:1116-12-2021 17:11
To Next Page
Loading...
