Need help?Do you have a question about the ADENDORFF MC900 and is the answer not in the manual?
Outlines essential safety rules for operating the wood lathe, emphasizing awareness, proper procedures, and environmental conditions.
Warns about hazardous dust and recommends ventilation and dust collection systems.
Stresses the importance of wearing safety goggles to prevent eye damage from flying debris during operation.
Details safety practices specific to wood lathe operation, including workpiece handling, tool usage, and rotation direction.
Provides safety guidelines for leaving the work area, tool storage, and completing tasks like hand-sanding.
Explains the necessity and method of grounding the tool to prevent electric shock.
Offers advice on selecting and using extension cords safely and effectively with the lathe.
Identifies and illustrates the various parts and components of the wood lathe.
Instructions for safely unpacking the lathe and verifying all components are present and undamaged.
Step-by-step guide to assembling the stand and leg structure for the lathe.
Procedures for mounting the main lathe bed and headstock assembly onto the leg set.
Details the installation of key components like spurs, faceplate, and extension bed.
Explains how to adjust and set the headstock to its various preset positions for different turning applications.
Guides on turning the lathe on/off and adjusting the motor speed using the control lever.
Instructions on moving and locking the tailstock and positioning the tool rest.
Outlines essential maintenance procedures, including cleaning, lubrication, and dust removal for smooth operation.
To Next Page
General