adeptus 6+2 Drawer Wide Roll Cart 76169 User Manual

ASSEMBLY INSTRUCTIONS
6+2 Drawer Wide Roll Cart
#76169 - Matte Black Finish
#76182 - White Finish
1/8
CUSTOMER SERVICE AND REPLACEMENT PARTS:
FOR FASTER SERVICE ON PARTS OR HELP, PLEASE GO TO OUR WEBSITE AT WWW.ADEPTUS.COM;
OR CALL TOLL FREE 1.888.ADEPTUS (1.888.233.7887) FOR ASSEMBLY QUESTIONS.
MON-FRI 10 A.M. TO 4 P.M. E.S.T., CLOSED HOLIDAYS
IF YOU CALL, PLEASE HAVE ON HAND:
• PRODUCT NAME AND STOCK NUMBER
• WHEN AND WHERE THE UNIT WAS PURCHASED
• P.O. NUMBER FROM THE BOTTOM OF THIS PAGE
IF WE ARE BUSY HELPING OTHER CUSTOMERS, PLEASE LEAVE YOU NAME AND NUMBER
TO RECEIVE A RETURN CALL.
YOUR RETAILER MAY ALSO PROVIDE SERVICE OR PARTS.
HELPFUL OVERALL:
• SAVE THESE INSTRUCTION SHEETS AND THE BOX UNTIL YOU ARE SATISFIED WITH THE ASSEMBLY.
• DO NOT GLUE THE PARTS OF THE UNIT TOGETHER UNLESS YOU HAVE TESTED THE ASSEMBLY FIRST.
• PERFORM THE ASSEMBLY ON A CLEAN HARD SURFACE USING THE FLATTENED CARTON OR A TOWEL
TO PROTECT THE SURFACE AND THE FINISH OF THE UNIT. DO NOT ASSEMBLE ON CARPET.
VISIT WWW.ADEPTUS.COM TO REGISTER YOUR PRODUCT AND SEE THE
COMPLETE ADEPTUS LINE. REGISTRATION IS REQUIRED FOR PARTS REQUESTS.
THANK YOU FOR YOUR PURCHASE AND WELCOM TO ADEPTUS!
NOTICE: THE WRITTEN INSTRUCTIONS CONTAINED HEREIN ARE COPYRIGHTED.

adeptus 6+2 Drawer Wide Roll Cart 76169 Specifications

General

Brand	adeptus
Model	6+2 Drawer Wide Roll Cart 76169
Category	Indoor Furnishing
Language	English

Summary

Customer Service and Support

Contacting Adeptus for Assistance

Information on how to contact Adeptus for customer service, replacement parts, and assembly assistance.

Helpful Assembly Advice

Pre-Assembly Precautions

Essential tips for assembly, like saving instructions, testing parts before gluing, and protecting surfaces.

Prepare Parts for Assembly

Insert Dowels into Components

Instructions for pushing dowels (Part A) into specific component edges as shown in the diagram.

Attach Drawer Runners to Side Panels

Steps for attaching drawer runners (Part D) to the right and left side panels, ensuring alignment and flush fit.

Prepare Caster Supports

Instructions for inserting caster inserts (Eb) and attaching casters (Ea) to the caster supports (Parts 6 & 7).

Attach the Sides to the Crossbars

Secure Caster Supports to Side Panels

Attaching back and front caster supports to the left and right side panels using screws (Part C).

Attach Middle Crossbar

Connecting the middle crossbar (Part 5) to both side panels using screws through the drilled holes.

Attach the Top

Secure Top Panel to Sides

Aligning the top panel (Part 1) with the side panels and securing it with screws (Part C).

Attach the Back Panel

Install and Secure Back Panel

Fitting the back panel (Part 4) into grooves and securing it with nails (Part F) for unit stability.

Assemble the Small Drawers

Construct Small Drawer Boxes

Steps to assemble small drawer boxes by joining sides, front, back, and bottom panels with screws and nails.

Final Assembly and Product Information

Assemble Large Drawers

Steps to assemble large drawer boxes by joining sides, front, back, and bottom panels with screws and nails.

Insert and Align Drawers

Sliding drawers, adjusting alignment, and following care instructions for the assembled unit.