5128-22 1.0
Assembly Instructions (English)
Tel: (212) 736 4440 Fax: (212) 736 4806
ASSEMBLY INSTRUCTION FOR
Stellar LED Combo Torchiere
Model# 5128-22
21 Penn Plaza Suite 909 New York,NY 10001
1. Screw tube (B),(C),(D),(E), and (F)
clockwise onto lamp base (G) and turn to
tighten.
2. Pull the excess cord and insert into tube
(B), then screw shade holder (A) and tube (B)
together.
3. Unscrew pre-assembled metal plate (I)
and screws (J) from shade holder (A).
4. Place the shade (H), metal plate (I) and
screws (J) onto shade holder (A), turn screws
(J) clockwise with wrench (K) to tighten
and secure the shade (A).
* Rotary Dimmer Switch: on -100% -> off ->
on -60% -> off -> on-30% -> off *
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to
reduce the risk of electric shock (one blade is larger
than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a
qualified electrician.Do not use with an extension cord
unless the plug can be fully inserted. DO NOT
ALTER THE PLUG .
To Next Page
Need help?
General